• Search
  • 0 Wish List
  • 0 Cart

3D-printed crow skull for self-painting (7cm)

3D-printed crow skull for self-painting (7cm)
3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm)

This 3D crow skull made of hard PLA is easy to paint for versatile use in LARP.

No. 302918
  • Head length: approx. 7cm
  • Widest head point: approx. 3cm

  • Material: 3D-printed Polylactic Acid (PLA)
  • Producer: Andracor

This 7cm large crow skull made of 3D-printed PLA is interesting for all witches, shamans, or even orcs and undead in LARP. The unpainted skull can easily be painted as desired and thus becomes a unique eyecatcher for your attire. But also as a decorative object in the camp, the crow skull makes quite an impression.

You can simply drill through the eye sockets to, for example, attach the skull to a chain or a leather strap. Due to its hardness, it is also suitable as an ornament on armor.

The skull is naturally vegan and was printed completely without animal suffering. And it is much harder than a real skull and therefore not likely to break quickly. It is available in white, black, and metallic shimmer.

Steps for painting a bone-colored skull

  • 1. Take sandpaper of a fine grade and lightly sand the skull, especially at the back of the head on the print support surface.
  • 2. Prime the skull with some primer, this will weaken the print lines and make the paint adhere better.
  • 3. Afterwards, prime the entire skull with a medium ochre or cream tone.
  • 4. Mix the ochre with black or brown and paint the depths of the skull such as eye and nose sockets, also paint scratches or hard edges and furrows in the skull.
  • 5. Mix an even darker tone and go even deeper into the darkest areas.
  • 6. Take a lighter tone than the ochre and wipe off the paint before applying it to the high points of the skull. (Drybrushing)
  • 7. Use pure black for the deepest holes in the skull and strong furrows.
  • 8. Add some additional details until you are satisfied with the painting.
  • 9. After drying, apply matte or clear varnish depending on the desired look, spray or paint the skull completely. This seals the paint and the skull is ready for use in LARP.
Included in delivery

  • Unpainted single-piece skull.
  • Without leather strap.

show more
show less
3D-printed crow skull for self-painting (7cm)
3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm) 3D-printed crow skull for self-painting (7cm)
8,99 €
incl. VAT, excl. shipping
No. 302918
In Stock

In Stock

Pre-order this variant now

Delivery time:

Only 21 days (production + shipping)

  • We will manufacture it just for you in our Workshop in Berlin!
In Stock

Pay safe & easy
More of it...
3D-printed raven skull for self-painting (10cm) NEW
Raven Skull - 3D Print (10cm)
3D-printed parts
from 11,99 €
3D-printed rat skull for self-painting (7cm) NEW
Rat Skull - 3D Print (7cm)
3D-printed parts
8,99 €
3D-printed cat skull for self-painting (12cm) NEW
Cat Skull - 3D Print (12cm)
3D-printed parts
23,99 €
Blasterparts Barrel Attachment Teammarker NEW
Barrel Attachment Teammarker
3D-printed parts
7,99 €
Blasterparts Barrel Attachment Classic Hider NEW
Barrel Attachment Classic Hider
3D-printed parts
9,99 €
Blasterparts Barrel Attachment Stronghold Short NEW
Barrel Attachment Stronghold Short
3D-printed parts
9,99 €
Blasterparts Barrel Attachment Assault Flash NEW
Barrel Attachment Assault Flash
3D-printed parts
9,99 €
Blasterparts Barrel Attachment Short Spikes NEW
Barrel Attachment Short Spikes
3D-printed parts
9,99 €
Blasterparts Barrel Attachment Spiral Flow NEW
Barrel Attachment Spiral Flow
3D-printed parts
9,99 €
Blasterparts Barrel Attachment Pulse Flash NEW
Barrel Attachment Pulse Flash
3D-printed parts
9,99 €
Blasterparts Barrel Attachment First Shot NEW
Barrel Attachment First Shot
3D-printed parts
9,99 €
Blasterparts Barrel Attachment Twisted Flash NEW
Barrel Attachment Twisted Flash
3D-printed parts
9,99 €
Blasterparts Barrel Attachment Space Cadet NEW
Barrel Attachment Space Cadet
3D-printed parts
9,99 €
Blasterparts - Foregrip for Raider and Rampage - long version (black)
Foregrip for Raider and Rampage
3D-printed parts
29,99 €
back to top